Description
SPECIFICATIONS
Brand Name: IdeaFormer
Origin: Mainland China
Item Type: Heat Paper
Model Number: Double-sided PET/PEI spring steel sheet textured and smooth
Size 1: 350x350mm
Application:: 3D printer heated bed
Square Sizes: 350x350mm
Print Instructions:
1. When first time printing, keep the built sheet smoothing (the nozzle and the hot bed distance adjust to A4 paper thickness).
2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.
3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base.
4. we suggested printing temperature:
PLA 60℃
PETG 70-80℃
ABS 90-100℃.
The temperature for:
PET and PEO sheet（40°C-80°C), (Max 80°C)
PEI( 160°C~180°C) for a long period of time, (Max200°C)
5. Take off the sheet from printing surface and bend the sheet slightly, you can easy to take the model.
Feature:
---Double-sided printing sheet, convenient and practical.
---PEIH high temperature resistance, scratch resistance, no deformation.
---No glue, strong stickinessand not easy to warping.
---Stainless spring steel, good flatness.
(Note: DO NOT USE ACETONE ON POWDER COATED PEI SIDE!!!!)
Package Including:
1 Set Spring Steel Sheet pre-applied Sheet+with or without Magnetic Rubber Plate.
(Note: You only will get 1 sheet if you order the build plate without Magnetic Rubber Plate.)
Maintenance
Wipe the print surface before and after a print with Isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength.Regardless of any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface.If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.
